Monday, 4 April 2016

Mikrotik PPPOE User Backup

Open New terminal and paste.. 


/ppp export file=ppp-users
Open File .
Copy And paste than open with notepad


Mikrotik hotspot user backup

Open new termenal and past ..




/ip hotspot export file=hotspot-users

Open File
Copy and paste then open with notepad

2 WAN Blancing Over PPPOE Dailup

########PPPoE-CLIENTS##########
/interface pppoe-client
add ac-name="" add-default-route=yes allow=pap,chap default-route-distance=1 dial-on-demand=no \
    disabled=no interface=ether1 keepalive-timeout=60 max-mru=1480 max-mtu=1480 mrru=1600 name=\
    pppoe-out1 password=XXXX profile=default service-name="" use-peer-dns=yes user=\
    XXXXXX
add ac-name="" add-default-route=yes allow=pap,chap default-route-distance=1 dial-on-demand=no \
    disabled=no interface=ether2 keepalive-timeout=60 max-mru=1480 max-mtu=1480 mrru=1600 name=\
    pppoe-out2 password=XXXXXXXXXX profile=default service-name="" use-peer-dns=yes user=\
    XXXXXXXXX


########FIREWALL MANGLE########
/ip firewall mangle
add chain=prerouting in-interface=pppoe-out1
add chain=prerouting in-interface=pppoe-out2
add action=mark-connection chain=prerouting dst-address-type=!local \
    new-connection-mark=wan1_conn per-connection-classifier=\
    both-addresses-and-ports:2/0
add action=mark-connection chain=prerouting dst-address-type=!local \
    new-connection-mark=wan2_conn per-connection-classifier=\
    both-addresses-and-ports:2/1
add action=mark-routing chain=prerouting connection-mark=wan1_conn \
    new-routing-mark=to_wan1
add action=mark-routing chain=prerouting connection-mark=wan2_conn \
    new-routing-mark=to_wan2

########FIREWALL NAT#########
/ip firewall nat
add action=masquerade chain=srcnat out-interface=pppoe-out1
add action=masquerade chain=srcnat out-interface=pppoe-out2

########IP ROUTE############
/ip route
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 routing-mark=to_wan1 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 routing-mark=to_wan2 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 scope=30 target-scope=10

4 WAN LoadBlancing With Pcc

/ip address
 add address=172.16.0.1/16 broadcast=172.16.255.255 comment="" disabled=no interface=Local network=172.16.0.0
 add address=192.168.1.2/24 broadcast=192.168.1.255 comment="" disabled=no interface=WAN1 network=192.168.1.0
 add address=192.168.2.2/24 broadcast=192.168.2.255 comment="" disabled=no interface=WAN2 network=192.168.2.0
 add address=192.168.3.2/24 broadcast=192.168.3.255 comment="" disabled=no interface=WAN3 network=192.168.3.0
 add address=192.168.4.2/24 broadcast=192.168.4.255 comment="" disabled=no interface=WAN4 network=192.168.4.0


/ip firewall mangle
 add action=mark-connection chain=input comment="" disabled=no in-interface=WAN1 new-connection-mark=WAN1_conn passthrough=yes
 add action=mark-connection chain=input comment="" disabled=no in-interface=WAN2 new-connection-mark=WAN2_conn passthrough=yes
 add action=mark-connection chain=input comment="" disabled=no in-interface=WAN3 new-connection-mark=WAN3_conn passthrough=yes
 add action=mark-connection chain=input comment="" disabled=no in-interface=WAN4 new-connection-mark=WAN4_conn passthrough=yes

add action=mark-routing chain=output comment="" connection-mark=WAN1_conn disabled=no new-routing-mark=to_WAN1 passthrough=yes
 add action=mark-routing chain=output comment="" connection-mark=WAN2_conn disabled=no new-routing-mark=to_WAN2 passthrough=yes
 add action=mark-routing chain=output comment="" connection-mark=WAN3_conn disabled=no new-routing-mark=to_WAN3 passthrough=yes
 add action=mark-routing chain=output comment="" connection-mark=WAN4_conn disabled=no new-routing-mark=to_WAN4 passthrough=yes

add action=accept chain=prerouting comment="" disabled=no dst-address=192.168.1.0/24
 add action=accept chain=prerouting comment="" disabled=no dst-address=192.168.2.0/24
 add action=accept chain=prerouting comment="" disabled=no dst-address=192.168.3.0/24
 add action=accept chain=prerouting comment="" disabled=no dst-address=192.168.4.0/24

add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local new-connection-mark=WAN1_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:4/0 src-address=10.0.0.1-10.0.0.255

add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local new-connection-mark=WAN2_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:4/1 src-address=10.0.0.1-10.0.0.255

add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local new-connection-mark=WAN3_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:4/2 src-address=10.0.0.1-10.0.0.255

add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local new-connection-mark=WAN4_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:4/3 src-address=10.0.0.1-10.0.0.255

add action=mark-routing chain=prerouting comment="" connection-mark=WAN1_conn disabled=no new-routing-mark=to_WAN1 passthrough=yes
 add action=mark-routing chain=prerouting comment="" connection-mark=WAN2_conn disabled=no new-routing-mark=to_WAN2 passthrough=yes
 add action=mark-routing chain=prerouting comment="" connection-mark=WAN3_conn disabled=no new-routing-mark=to_WAN3 passthrough=yes
 add action=mark-routing chain=prerouting comment="" connection-mark=WAN4_conn disabled=no new-routing-mark=to_WAN4 passthrough=yes

/ip firewall nat
 add action=masquerade chain=srcnat comment="" disabled=no out-interface=WAN1 src-address=10.0.0.1-10.0.0.255
 add action=masquerade chain=srcnat comment="" disabled=no out-interface=WAN2 src-address=10.0.0.1-10.0.0.255
 add action=masquerade chain=srcnat comment="" disabled=no out-interface=WAN3 src-address=10.0.0.1-10.0.0.255
 add action=masquerade chain=srcnat comment="" disabled=no out-interface=WAN4 src-address=10.0.0.1-10.0.0.255

/ip route
 add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.1.1 routing-mark=to_WAN1 scope=30 target-scope=10

add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.2.1 routing-mark=to_WAN2 scope=30 target-scope=10

add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.3.1 routing-mark=to_WAN3 scope=30 target-scope=10

add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.4.1 routing-mark=to_WAN4 scope=30 target-scope=10

add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=30 target-scope=10

add check-gateway=ping comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.2.1 scope=30 target-scope=10

add check-gateway=ping comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.3.1 scope=30 target-scope=10

add check-gateway=ping comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.4.1 scope=30 target-scope=10

2 WAN LoadBlancing WIth Nth mathad

/ip address
add address=192.168.1.3/24 network=192.168.1.0 broadcast=192.168.1.255 interface=WAN1 comment="" disabled=no
add address=192.168.2.3/24 network=192.168.2.0 broadcast=192.168.2.255 interface=WAN2 comment="" disabled=no
add address=10.10.0.1/24 network=10.10.0.0 broadcast=10.10.0.255 interface=internal comment="" disabled=no

/ip firewall mangle
add chain=prerouting in-interface=internal connection-state=new nth=2,1 action=mark-connection new-connection-mark=conn1 passthrough=yes comment="" disabled=no
add chain=prerouting in-interface=internal connection-mark=conn1 action=mark-routing new-routing-mark=conn1 passthrough=no comment="" disabled=no
add chain=prerouting in-interface=internal connection-state=new nth=1,1 action=mark-connection new-connection-mark=conn2 passthrough=yes comment="" disabled=no
add chain=prerouting in-interface=internal connection-mark=conn2 action=mark-routing new-routing-mark=conn2 passthrough=no comment="" disabled=no


/ip firewall nat
add chain=srcnat connection-mark=conn1 action=masquerade out-interface=WAN1 comment="" disabled=no
add chain=srcnat connection-mark=conn2 action=masquerade out-interface=WAN2 comment="" disabled=no


/ip route
add dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=255 target-scope=10 routing-mark=conn1 comment="" disabled=no
add dst-address=0.0.0.0/0 gateway=192.168.2.1 scope=255 target-scope=10 routing-mark=conn2 comment="" disabled=no

2 WAN LoadBlancing With Pcc methad

/ip address
add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local
add address=192.168.1.2/24 network=192.168.1.0 broadcast=192.168.1.255 interface=WAN1
add address=192.168.2.2/24 network=192.168.2.0 broadcast=192.168.2.255 interface=WAN2

/ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=5000KiB max-udp-packet-size=512 servers=221.132.112.8,8.8.8.8

/ip firewall mangle
add chain=input in-interface=WAN1 action=mark-connection new-connection-mark=WAN1_conn
add chain=input in-interface=WAN2 action=mark-connection new-connection-mark=WAN2_conn

add chain=output connection-mark=WAN1_conn action=mark-routing new-routing-mark=to_WAN1
add chain=output connection-mark=WAN2_conn action=mark-routing new-routing-mark=to_WAN2

add chain=prerouting dst-address=192.168.1.0/24 action=accept in-interface=Local
add chain=prerouting dst-address=192.168.2.0/24 action=accept in-interface=Local

add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:2/0 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes
add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:2/1 action=mark-connection new-connection-mark=WAN2_conn passthrough=yes

add chain=prerouting connection-mark=WAN1_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN1
add chain=prerouting connection-mark=WAN2_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN2

/ip route
add dst-address=0.0.0.0/0 gateway=192.168.1.1 routing-mark=to_WAN1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.2.1 routing-mark=to_WAN2 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.1.1 distance=1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.2.1 distance=2 check-gateway=ping

/ip firewall nat
add chain=srcnat out-interface=WAN1 action=masquerade
add chain=srcnat out-interface=WAN2 action=masquerade

3 WAN Uneqeal Loadblancing

/ip address
add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local
add address=192.168.1.5/24 network=192.168.1.0 broadcast=192.168.1.255 interface=WAN1
add address=192.168.2.5/24 network=192.168.2.0 broadcast=192.168.2.255 interface=WAN2
add address=192.168.3.5/24 network=192.168.3.0 broadcast=192.168.3.255 interface=WAN3
/ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=5000KiB max-udp-packet-size=4096 servers=221.132.112.8,8.8.8.8
/ip firewall mangle
add chain=input in-interface=WAN1 action=mark-connection new-connection-mark=WAN1_conn
add chain=input in-interface=WAN2 action=mark-connection new-connection-mark=WAN2_conn
add chain=input in-interface=WAN3 action=mark-connection new-connection-mark=WAN3_conn
add chain=output connection-mark=WAN1_conn action=mark-routing new-routing-mark=to_WAN1
add chain=output connection-mark=WAN2_conn action=mark-routing new-routing-mark=to_WAN2
add chain=output connection-mark=WAN3_conn action=mark-routing new-routing-mark=to_WAN3
add chain=prerouting dst-address=192.168.1.0/24 action=accept in-interface=Local
add chain=prerouting dst-address=192.168.2.0/24 action=accept in-interface=Local
add chain=prerouting dst-address=192.168.3.0/24 action=accept in-interface=Local
add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:4/0 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes
add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:4/1 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes
add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:4/2 action=mark-connection new-connection-mark=WAN2_conn passthrough=yes
add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:4/3 action=mark-connection new-connection-mark=WAN3_conn passthrough=yes
add chain=prerouting connection-mark=WAN1_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN1
add chain=prerouting connection-mark=WAN2_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN2
add chain=prerouting connection-mark=WAN3_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN3
/ip route
add dst-address=0.0.0.0/0 gateway=192.168.1.1 routing-mark=to_WAN1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.2.1 routing-mark=to_WAN2 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.3.1 routing-mark=to_WAN3 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.1.1 distance=1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.2.1 distance=2 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.3.1 distance=3 check-gateway=ping
/ip firewall nat
add chain=srcnat out-interface=WAN1 action=masquerade
add chain=srcnat out-interface=WAN2 action=masquerade
add chain=srcnat out-interface=WAN3 action=masquerade